Noco Boost Plus GB40: A Detailed Review




Powering Up: A Comprehensive Review of the NOCO Boost GB40 UltraSafe Portable Car Jump Starter

For car owners dead batteries are a ubiquitous nuisance. In this article we are going to review the Enter the noco boost plus GB40 UltraSafe Portable Car Jump Starter. A compact yet potent 1000-amp lithium battery solution promising to rescue vehicles from the clutches of a drained power source. Let’s dive into a comprehensive overview of this innovative product, covering key aspects that make it a standout in the market.

Compatibility: A Lifeline for Various Engines

One of its prime highlights is its broad compatibility, catering to gasoline engines up to 6.0-liters and diesel engines up to 3.0-liters. This wide range ensures versatility and the ability to assist a diverse array of vehicles.

Compact and Rugged Design:

NOCO Boost Plus GB40 review

The advanced design of the NOCO Boost Plus GB40 is evident in its compact and lightweight build, weighing just 2.4 pounds. Its high-discharge lithium technology ensures safe operation in any climate, while the rugged and water-resistant enclosure (rated at IP65) makes it capable of handling challenging conditions. The rubberized over-molded casing prevents scratching or marring of surfaces, enhancing its durability and longevity.

Enhanced Features: More Than Just a Jump Starter

Beyond its primary function as a jump starter, this device serves as a portable power bank, equipped to recharge smartphones, tablets, and USB devices. The integrated 100-lumen LED flashlight with multiple modes, including emergency strobe and SOS, adds an additional layer of utility to this versatile tool.

Durability and Longevity: Built to Last

Crafted with high-discharge lithium technology, this jump starter operates reliably in various climates. Its rugged, water-resistant IP65-rated enclosure and rubberized over-molded casing ensure protection against scratches and offer durability for long-term usage.

User Satisfaction: Meeting Expectations

User feedback highlights satisfaction with the GB40’s performance, reliability, and ease of use. Many users commend its effectiveness in swiftly jump-starting vehicles and its ability to serve as a multi-purpose emergency tool.

Environmental Impact: Efficiency in Every Charge

With its rechargeable nature and the ability to power up from any USB port in just three hours, the GB40 stands as an eco-friendly option compared to traditional disposable batteries, minimizing waste and environmental impact.

How to install and use NOCO Boost Plus GB40

How to install and use NOCO Boost Plus GB40

Portable jump starters like the NOCO Boost Plus GB40 are a lifesaver when dealing with a dead battery. Whether you’re stranded in a parking lot or need a quick jump for a friend, this compact device is a reliable companion. Here’s a step-by-step guide on how to install and effectively use the NOCO Boost Plus GB40.

Installation Process:

1. Proper Connection Setup:

  • Connect the clamp assembly firmly to the 12-volt out port on the NOCO Boost GB40.
  • Attach the red clamp to the positive terminal (+) of the battery and the black clamp to the negative terminal (-).

2. Powering On the Unit:

  • After the clamps are secured, power on the unit. Look for the charge LEDs to start chasing, indicating that the Boost GB40 has detected the battery.

3. Ready for Jumpstart:

  • Once the charge LEDs are chasing and the Boost LED illuminates, your NOCO Boost GB40 is ready to jumpstart the vehicle.

How to use the NOCO Boost Plus GB40:

1. Initiating the Jumpstart:

  • Start the vehicle while ensuring the Boost GB40 is powered on and ready.
  • Once the vehicle is running, power off the unit before disconnecting the clamps from the battery terminals.

2. Manual Override:

  • If the charge LEDs do not change upon powering on the unit, it suggests that the Boost GB40 is unable to detect the battery, possibly due to low voltage (under 2 volts).
  • To tackle this situation, utilize the manual override function by pressing and holding the manual override button until the charge LEDs start chasing.
  • Remember, activating manual override disables safety features like spark proof and reverse polarity protection. Use it with extreme caution.

3. Charging the NOCO Boost Plus GB40:

  • Recharging the unit is simple. Locate the USB in-port on the left side of the Boost GB40 and connect the micro USB cable.
  • Plug the other end of the cable into a phone charger, 12-volt car adapter, USB charger, computer, or any powered USB port.
  • Upon connection, the charge LEDs will begin to slowly pulse. A full charge typically takes around three hours, indicated by a solid green LED.

Following these instructions will help you efficiently install, use, and recharge your NOCO Boost Plus GB40, providing a reliable solution for jump-starting vehicles when needed. Always prioritize safety and proper usage guidelines to make the most out of this versatile device.

Leave a Comment

Your email address will not be published. Required fields are marked *