Best Trunk Lock – 2024

Comprehensive Guide to Handling Trunk Locks: From Picking to Replacing

Trunk locks are essential for securing your belongings in your vehicle, but they can also pose challenges if you lose your keys or need to replace the lock. In this article we are going to give you the Best Trunk Lock.

This guide addresses common questions and provides solutions for various trunk lock issues, including picking the lock, what to do if you lock your keys in the trunk, and how to replace the trunk lock cylinder. 

How to Pick a Trunk Lock

Picking a trunk lock should only be done if you own the vehicle or have permission to do so. Here’s a general method for picking a trunk lock:

1. Tools Needed: You’ll need a tension wrench and a lock pick or a bobby pin.
2. Insert Tension Wrench: Place the tension wrench into the bottom of the keyhole and apply gentle pressure in the direction the key would turn.
3. Insert Lock Pick/Bobby Pin: Insert the lock pick or a bent bobby pin into the top of the keyhole.
4. Feel for Pins: Gently lift the pins inside the lock. You should feel the pins set into place.
5. Turn the Lock: Once all pins are set, use the tension wrench to turn the lock and open the trunk.

What to Do If You Lock Your Keys in Your Trunk

Locking your keys in your trunk can be frustrating, but here are some steps to help you regain access:

1. Check for Spare Key: See if you have a spare key available.
2. Use the Interior Trunk Release: Many vehicles have an interior trunk release lever or button. Check your vehicle’s manual for its location.
3. Fold Down Rear Seats: If your vehicle has foldable rear seats, you can access the trunk by folding them down.
4. Call a Locksmith: If you can’t access the trunk, a professional locksmith can help.
5. Contact Roadside Assistance: If you have roadside assistance, they can provide lockout services.

How to Remove a Trunk Lock Cylinder Without a Key

Removing a trunk lock cylinder without a key requires some technical skills and tools. Here’s a general procedure:

1. Tools Needed: Screwdrivers, pliers, and a lock removal tool.
2. Access the Lock Cylinder: Open the trunk and locate the lock cylinder on the inside of the trunk lid.
3. Remove the Retaining Clip: Use pliers to remove the retaining clip holding the lock cylinder in place.
4. Extract the Lock Cylinder: Once the clip is removed, you can pull the lock cylinder out of the trunk lid.
5. Install a New Cylinder: Insert the new lock cylinder and secure it with the retaining clip.

How to Pick a Steamer Trunk Lock

Steamer trunk locks are typically simpler than modern car trunk locks. Here’s how you can pick one:

1. Tools Needed: A tension wrench and a lock pick or a bobby pin.
2. Insert Tension Wrench: Place the tension wrench in the keyhole and apply slight pressure.
3. Insert Lock Pick/Bobby Pin: Use the pick or bobby pin to manipulate the pins inside the lock.
4. Set the Pins: Feel for the pins and gently lift them until they set.
5. Turn the Lock: Once all pins are set, turn the tension wrench to open the lock.

How to Pick a Lock on a Trunk

The process for picking a lock on a trunk is similar to other types of locks:

1. Tools Needed: Tension wrench and lock pick or bobby pin.
2. Apply Tension: Insert the tension wrench and apply pressure in the direction of the key turn.
3. Manipulate the Pins: Insert the lock pick or bobby pin and lift the pins until they set.
4. Turn the Lock: Once all pins are set, turn the wrench to open the lock.

How to Replace a Trunk Lock Cylinder

Replacing a trunk lock cylinder involves removing the old cylinder and installing a new one:

1. Tools Needed: Screwdrivers, pliers, and a new lock cylinder.
2. Access the Old Lock Cylinder: Open the trunk and locate the lock cylinder.
3. Remove the Retaining Clip: Use pliers to remove the clip holding the cylinder.
4. Extract the Old Cylinder: Pull the old cylinder out of the trunk lid.
5. Install the New Cylinder: Insert the new lock cylinder and secure it with the retaining clip.

How to Pick a Trunk Lock with a Bobby Pin

Using a bobby pin to pick a trunk lock is similar to using a lock pick:

1. Tools Needed: Bobby pin and a tension wrench.
2. Prepare the Bobby Pin: Bend the bobby pin into a straight line, then create a small hook at the end.
3. Insert the Tension Wrench: Place the wrench in the bottom of the keyhole and apply pressure.
4. Insert the Bobby Pin: Use the hooked end to lift the pins inside the lock.
5. Set the Pins: Feel for each pin and lift it until it sets.
6. Turn the Lock: Once all pins are set, turn the tension wrench to open the lock.